8
Panel Description
6. BASS IN Jack
This jack accepts input signal coming
from a bass guitar.
* BASS IN is disabled when the GUITAR
IN jack is used.
* When running the unit on battery power,
the GUITAR IN and BASS IN jacks
double as power switches. Power to the
unit is turned on when you plug into the
GUITAR IN or BASS IN jack; the power
is turned off when the cable is unplugged.
Be sure to disconnect any cord plugged
into the GUITAR IN or BASS IN jack
when not using this effects device.
7. Pedal Switch
Used for switching effects on/off, and for
inputting the tempo (in Tempo mode: p. 14).
8. Thumbscrew
When this screw is loosened, the pedal
will open, allowing you to change the bat-
tery.
* For the procedure, refer to “Changing the
Battery” (p. 18).
1291011
To Next Page
Loading...
Need help?
General
