EasyManuals Logo

Boss AW-3 Dynamic Wah User Manual

Boss AW-3 Dynamic Wah
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Panel Description
2. CHECK Indicator
Combination indicator that shows the ef-
fect’s on/off status, tempo (in Tempo
mode: p. 14), and Battery Check function.
The indicator is lit when the effect is on,
thereby allowing you to check whether
the effect is on or off.
* If the indicator dims when the effect is on
or when the tempo is being displayed, it
means that the battery is running out of
reserve; when this occurs, replace with
fresh batteries. For instructions on
changing the batteries, refer to
“Changing the Battery” (p. 18).
* The CHECK indicator shows whether the
effect is being applied or not, and is used to
indicate other effects. It does not indicate
whether the power to the device is on or not.
3. OUTPUT Jack
This output jack is connected to an ampli-
fier or other effects device.
4. EXP/CTL Jack
Accepts connection of either an expression
pedal (the optional Roland EV-5), or a mo-
mentary-type foot switch (the optional
BOSS FS-5U). This allows you to attain ped-
al wah and Humanizer effects. It also allows
setting of the tempo (while in Tempo mode).
* For more information and instructions,
refer to “Description of Each Mode” (p. 12)
and “Using the EXP/CTL Jack” (p. 16).
5. GUITAR IN Jack
This jack accepts input signals (coming
from a guitar, some other musical instru-
ment, or another effects unit).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Boss AW-3 Dynamic Wah and is the answer not in the manual?

Boss AW-3 Dynamic Wah Specifications

General IconGeneral
BrandBoss
ModelAW-3 Dynamic Wah
CategoryMusic Pedal
LanguageEnglish

Related product manuals