Various Settings
14
Preserving/Muting the Tail of an Effect when the Effect is Switched Off
(CARRYOVER)
This sets whether to preserve (carry over) the tail of an effect after the effect is switched off or when switching to a different
memory.
1.
Press and hold down the [TAP] switch, and turn on the power.
2.
Turn the [MODE SELECTOR] knob to the “10” setting.
3.
Use the [MEMORY] button to select the setting.
Reverberation carries over
Reverberation does not carry over
4.
Press the [TAP] switch to exit the settings.
To Next Page
Loading...
