Boss Space Echo RE-202 - Setting the Operation Mode for the [REPEAT RATE] Knob (TIME MODE)

Various Settings
15
Setting the Operation Mode for the [REPEAT RATE] Knob (TIME MODE)
You can switch the operating mode of the [REPEAT RATE] knob to change the tape speed’s adjustable range. The setting range for
the tap delay time (delay time for playback head 1) also changes at the same time.
1. Press and hold down the [TAP] switch, and turn on the power.
2. Turn the [MODE SELECTOR] knob to the “11” setting.
3. Use the [MEMORY] button to select the mode.
MEMORY indicators
Mode
Function
MANUAL
Normal
The [REPEAT RATE] knob operates in the same range as the Roland RE-201.
The value for the tap delay time can be set to a maximum of one second.
1
Long
The setting range for the [REPEAT RATE] knob is twice that of Normal mode.
The value for the tap delay time can be set to a maximum of two seconds.
4. Press the [TAP] switch to exit the settings.