Boss Space Echo RE-202 - Page 4

Panel Descriptions
4
Name
Function
10
[REPEAT RATE]
knob
Adjusts the tape speed. The farther the knob is turned clockwise, the shorter the intervals become
between echoes. The tone also changes along with the speed.
11
[INTENSITY]
knob
Adjusts the echo volume (amount of feedback). Turn this all the way clockwise to make the effect oscillate.
12
[ECHO VOL]
knob
Adjusts the echo volume.
13
[ON/OFF] switch
Press to turn the effect on/off.
Long-press (WARP) to create stronger reverberations the longer you press, producing a dreamlike sound.
14
[MEMORY]
switch
Press to switch between memories.
Long-press to select whether reverb is used simultaneously with echo or not.
15
[TAP] switch
Press to set the REPEAT RATE according to the tempo of the song being played.
Long-press (TWIST) to produce an aggressive sense of rotation that oscillates the echoed sound while you
press.