23
DIGITAL WATCHES
Digital Chronograph Models
Start/Stop
(pusher D)
Lighting /
Re-initialization
(pusher A)
Setting
(pusher C)
Mode (pusher B)
Overview
Press button A to activate the backlight for
3 seconds in any mode.
Press button B to move between modes.
Button C and D are used to adjust setting and operate the
chronograph.
NOTE: Press and release a button repeatedly to advance
displayed information in single increments; press and hold
button down to advance information in a display rapidly.
1. Real time
Press A to turn on lighting whatever the mode selected.
Setting the time:
1. Press C to set the time.
2. Press B to select the hour, minutes, year, month
and day.
3. Press D to set the flashing unit and C to return to Real
Time mode.
4. Setting the second time-zone: with the time setting
function selected, press A to choose the 12 or
24 hour format.
2. Setting the Alarm function
1. Press C to select alarm setting. This causes the hour
display to flash and sets the alarm to auto start.
2. Press B to select the hour, minutes, year, month
and day.
3. Press D to set the flashing and C to return to
Alarm mode.
4. With the Alarm function selected, press A to stop
or start the alarm (
) or the chime ( ).
5. When the alarm time is displayed, an alert sounds and an
indicator (
) flashes for around 20 seconds.
3. Timer
Setting the timer:
1. Press C to select the timer:
2. Press A to start/stop the timer.
3. Press B to set the hour, minutes and seconds.
4. Press D to set the flashing and C to return to
Timer mode.
5. Functioning of the timer:
Press D to start/stop the timer:
press C to reset to zero when the timer stops.
6. A 10 second alert is triggered at this precise moment.
4. Chronograph
1. Press D to start/stop the Chronograph:
2. Once the Chronograph stops, press A to reset it
to zero.
3. When the Chronograph is running, it is possible to press B
to return to Real Time mode.
To Next Page
Loading...
