To Next PageTo Next Page
Need help?Do you have a question about the Bostitch 650S4 and is the answer not in the manual?
Details essential eye and hearing protection for safe tool operation.
Critical warnings for air source, pressure, and connections to prevent injury.
Safety advice for loading the tool and safe handling during operation.
Safety considerations when performing maintenance or troubleshooting.
Details on tool models, dimensions, and compatible fastener types.
Information on air fitting type, operating pressure, and air consumption rates.
Explanation of the contact trip method for driving fasteners.
Explanation of the sequential trip method for driving fasteners.
Explanation of the trigger-only method for driving fasteners.
Guidance on identifying the tool's operating mode by trigger color.
Guidelines for fittings, hoses, supply source, regulator, and filter.
Instructions for proper lubrication, including cold weather operation.
Step-by-step instructions for loading fasteners into the magazine.
Procedure for adjusting the fastener drive depth using the Dial-A-Depth feature.
How to operate the tool using only the trigger.
Instructions for single fastener and rapid fastener placement.
Procedure for operating the tool using sequential trip activation.
Steps to verify correct operation for trigger, contact, and sequential modes.
Essential safety rules for using the pneumatic stapler effectively.
Illustrations and explanations of the four functional cycles of the tool.
Guidance on handling springs, replacement parts, and seals.
Understanding the impact of air volume and pressure on tool performance.
Common problems, their causes, and suggested corrections for staplers.
Common problems, causes, and corrections for coil nailers.
How to adjust the exhaust deflector for desired direction.
Explanation and procedure for using the quick release magazine.
List of compatible accessories and recommended tools for use.
General
