Bostitch 650S5 User Manual

105805 REVD 5/99
BOSTITCH
®
BOSTITCH
®
Stanley Fastening Systems
600, 700 & 800 SERIES
PNEUMATIC STAPLER
ENGRAPADORA NEUMÁTICA
AGRAFEUSE PNEUMATIQUE
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR STANLEY-BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE SEGURI-
DAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA HERRAMIENTA
PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON SU REPRESEN-
TANTE DE STANLEY-BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVERTISSE-
MENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS AVEZ DES
QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE
STANLEY-BOSTITCH.

Bostitch 650S5 Specifications

General

Brand	Bostitch
Model	650S5
Category	Nail Gun
Language	English

Summary

SAFETY INSTRUCTIONS

AIR SUPPLY AND CONNECTIONS

Guidelines for connecting air supply safely.

LOADING TOOL SAFETY

Procedures for safely loading the stapler.

GENERAL OPERATION SAFETY

Safe practices for using the stapler.

TOOL MAINTENANCE SAFETY

Precautions during tool maintenance.

TOOL SPECIFICATIONS

MODEL AND FASTENER SPECIFICATIONS

Details on tool models and fastener compatibility.

AIR FITTING AND OPERATING PRESSURE

Information on air fitting and operating pressure.

AIR CONSUMPTION REQUIREMENTS

Required air volume for tool operation.

TOOL OPERATION MODES

CONTACT TRIP OPERATION

How to use the contact trip mechanism.

SEQUENTIAL TRIP OPERATION

How to use the sequential trip mechanism.

TRIGGER OPERATED MODE

How to use the trigger-only operated mode.

MODEL IDENTIFICATION

How to identify tool operation modes.

AIR SUPPLY AND CONNECTIONS

FITTINGS, HOSES, AND SUPPLY

Requirements for air fittings, hoses, and supply.

REGULATOR AND OPERATING PRESSURE

Proper air supply regulator and pressure use.

AIR FILTER MAINTENANCE

Importance of air filter and its maintenance.

LUBRICATION GUIDELINES

COLD WEATHER LUBRICATION

Lubrication recommendations for cold weather.

DIAL-A-DEPTH FASTENER CONTROL ADJUSTMENT

ADJUSTMENT PROCEDURE

Steps to adjust fastener depth control.

TOOL OPERATION CHECK

TRIGGER OPERATED CHECK

Procedure to check trigger operation.

CONTACT TRIP CHECK

Procedure to check contact trip operation.

SEQUENTIAL TRIP CHECK

Procedure to check sequential trip operation.

MAINTAINING THE PNEUMATIC TOOL

PUSHER SPRING HANDLING CAUTIONS

Caution for handling the pusher spring.

REPLACEMENT PARTS AND SEALS

Recommendations for parts and seal assembly.

AIR SUPPLY PRESSURE AND VOLUME

Importance of adequate air supply.

TROUBLE SHOOTING

GENERAL TOOL PROBLEMS

Common issues and their corrections.

COIL NAILER PROBLEMS

Troubleshooting specific to coil nailers.