Bostitch D62ADC User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
D62ADC/DS-3219/DS-3522
PNEUMATIC CARTON CLOSER
GRAPADORA NEUMÁTICA PARA CARTÓN
AGRAFEUSE PNEUMATIQUE POUR CARTON
182232RE 03/12
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS
AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.
D62ADC
DS-3219/DS-3522

Bostitch D62ADC Specifications

General

Motor	Not Applicable
Fastener Type	Nails
Voltage	Not Applicable
Amperage	Not Applicable
CFM at 40 PSI	Not Applicable
CFM at 90 PSI	Not Applicable

Summary

Comprehensive Safety Guidelines

Personal Protective Equipment

Mandatory eye protection conforming to ANSI Z87.1 and recommended hearing/head protection.

Safe Air Supply and Connections

Warnings on power sources, pressure limits, air connections, and disconnecting air supply.

Safe Tool Operation and Loading

Air Supply System Details

Air Supply Components and Safety

Operating Pressure and Air Consumption

Staple Loading and Safety

General Loading Safety

Essential safety precautions during loading, including eye protection and avoiding accidental actuation.

Staple Compatibility and D62ADC Loading

D62ADC Loading and Operation Details

DS-3219/DS-3522 Loading and Operation

Staple Loading and Adjustments

Stapling Procedure and Jam Removal

Tool Operation Check and Safe Use

Essential Safe Operation Guidelines

Key safety rules for tool usage, handling, and maintenance, including warnings against misuse and alterations.

Troubleshooting Common Issues

Air Leaks and Cycling Problems

Diagnosing and correcting air leaks from the trigger valve or frame, and issues with tool cycling.

Performance and Fastener Feed Issues

Resolving problems with lack of power, slow cycling, skipped fasteners, and jammed fasteners.