Bostitch F33PT User Manual

F21PL / F21PL-2 / F28WW
F33PT / F33PTSM
PNEUMATIC STICK NAILER
CLAVADORA NEUMÁTICA ALIMENTADA POR BARRA
CLOUEUR PNEUMATIQUE À CARTOUCHE
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
166762RJ 03/13
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR STANLEY-BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDIAR
ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA
HERRAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON
SU REPRESENTANTE DE STANLEY-BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX
AVERTISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS
AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE
CONCESSIONNAIRE STANLEY-BOSTITCH.
STANLEY FASTENING SYSTEMS L.P.
FSeries_166762RJ_BOS_FSeries_MAN_CC:FSeries_166762RJ_BOS_FSeries_MAN_CC 2013/3/6 上午10:02 Page 1

Bostitch F33PT Specifications

General

Brand	Bostitch
Model	F33PT
Category	Nail Gun
Language	English

Summary

Introduction and Warranty

Fastener Compatibility Notes

Guidance on using compatible STANLEY-BOSTITCH fasteners for optimal tool performance.

Limited Warranty Information

Details of the limited warranty for pneumatic tools in the US and Canada.

Safety and Handling Precautions

Personal Protective Equipment (PPE)

Mandates eye protection conforming to ANSI Z87.1 and discusses hearing/head protection.

Air Supply and Loading Safety

Warnings on air source, pressure, disconnection, and safe nail loading.

Tool Specifications and Operation Modes

Model and Fastener Requirements

Details on tool models, compatible fasteners, air fittings, and pressure.

Sequential vs. Contact Trip Operation

Explanation of sequential and contact trip modes and their use.

Lubrication and Air System Details

Lubrication Best Practices

Guidance on selecting and applying lubricant for tool longevity.

Air Supply System Components

Information on filters, regulators, and supply sources for optimal air delivery.

Loading Tools and Guide Rods

Safe Nail Loading Procedures

Safety warnings and steps for loading nails into the magazine.

Guide Rod Installation and Removal

Instructions for fitting and removing the guide rod on specific tool models.

Depth Control and Nail Removal

Adjusting Fastener Depth

How to use the adjustment feature for desired nail depth.

Directional Exhaust and Nail Clearing

Adjusting exhaust and procedures for removing nails from the tool.

Installing Metal Connector Attachment

Attachment Safety and Installation Steps

Critical safety warnings and detailed procedures for installing the attachment kit.

General Tool Operation

Pre-Operation Checks and System Identification

Importance of reading the manual and identifying the tool's operating system.

Sequential Trip Operation Details

Comprehensive explanation of sequential trigger operation and safety features.

Contact Trip Operation Details

Explanation of single fastener and rapid fire nailing techniques.

Continued Operation Safety

Contact Trip Safety and General Rules

Specific safety advice for contact trip and general safe handling practices.

Operating with Metal Connector Attachment

Safety and Sequential Trip for Metal Connectors

Strict guidelines for using metal connectors, trigger types, and nails.

Tool Operation Verification and Safety Rules

Operation Functionality Checks

Procedures to confirm correct operation of sequential and contact trip mechanisms.

Comprehensive Safe Operation Guidelines

Summary of essential rules for safe tool use, handling, and maintenance.

Pneumatic Tool Maintenance

Pusher Spring and Replacement Parts

Safety for spring handling and recommendation for genuine replacement parts.

Seal Assembly and Air Volume

Procedures for seal assembly and the importance of air volume.

Troubleshooting Pneumatic Tool Issues

Air Leaks and Cycling Problems

Diagnosing and correcting air leaks and non-cycling issues.

Slow Operation and Feed Issues

Solutions for slow cycling, intermittent feeding, and lubrication problems.

Fastener Jams and Misses

Troubleshooting tips for jammed fasteners and fastener misses.