Vercise™ DBS Remote Control 4 Directions for Use
Vercise™ DBS Remote Control 4 Directions for Use
92378769-02 10 of 1157
Program Selection and Activation
A stimulation program is a set of stimulation parameters that determine the patient’s therapy. A program
may apply stimulation to as many as four independent stimulation elds or areas, depending on how the
program is set up. For example, one area may correspond to a right brain target, whereas another area
may correspond to a left brain target. The Remote Control can store up to four programs – numbered 1
through 4 – for the patient to select and activate at any time.
1. Press the
button on the left side of the Remote Control to display the Programs screen.
Note:
You can also navigate to the Programs menu from the Main Menu. See the “Accessing the
Main Menu” section of this manual for additional instructions.
2. Select Change Program.
3. Press the Up or Down Arrow buttons to navigate to the desired program.
4. Press the Right Arrow
button to select the program.
To Next Page
Loading...
Need help?
General
