Vercise™ DBS Remote Control 4 Directions for Use
Vercise™ DBS Remote Control 4 Directions for Use
92378769-02 12 of 1157
Changing Stimulation Level
A program may apply stimulation to one area, or up to four areas, depending on how the program is set
up. The stimulation level for an area may be changed if allowed by the clinician using the Remote Control.
1. From the Main Menu: Select Stimulation.
2. Use the Navigation buttons ( ) to select the desired area.
3. Press the Minus button to decrease the level of stimulation.
4. Press the Plus
button to increase the level of stimulation.
To Next Page
Loading...
