Stimulator Battery Messages
Vercise™ DBS Remote Control 4 Directions for Use
92378769-02 47 of 1157
Troubleshooting
Bluetooth Help
Common sources of interference, such as Wi-Fi routers, cordless phones, Bluetooth wireless streaming
devices, baby monitors, and microwave ovens, can affect wireless communication. You will continue
to have access to the Remote Control menus even if the Remote Control is outside its effective
communication range with the Stimulator. If you enter a command to change your settings or programs
while the Remote Control is outside of its effective communication range, you will have several seconds
to move the Remote Control within range of the Stimulator to send the command. After the command
is received by the Stimulator, the Remote Control will make a double-beep then display the requested
change on the screen. If the Remote Control is unable to communicate with the Stimulator, the Bluetooth
Error message will appear:
To retry communication with the Stimulator – this resends the last command – select Retry. To cancel
communication and return to the screen, press
.
To Next Page
Loading...
Need help?
General
