Basic Operation
Vercise™ DBS Remote Control 4 Directions for Use
92378769-02 5 of 1157
4. Select the Stimulator that you wish to link to. The Link as Patient Remote? screen displays with
the Stimulator serial number.
5. Select Yes to link as the Patient Remote. A Remote Control that is intended to be utilized by the
patient must be linked as the Patient Remote.
or
Select No to cancel the action or to temporarily link to the Stimulator for use in the clinic. See the
“Stimulator Search and Linking” section of this manual for further information.
To Next Page
Loading...
