EasyManua.ls Logo

Bowa Argon - Operation; Technical Specifications

Bowa Argon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
en
24 BOWA-IFU-MN030-978-S11-ARGON-ML-20230221
6 Ambient conditions
6.1 Transport and storage
1. BOWA recommends storing the products in their original packaging
until their first use. Store the products in a location where they are
protected against:
Strong mechanical stresses such as shock, dropping or impact
Direct exposure to sunlight.
X-ray radiation
Heat sources (e.g. heat exchanger, air conditioning unit,…)
2. Transport and store the instrument in a dry environment.
The storage life of the sterilised devices depends on the type of packaging
and storage conditions.
The shipping box is not intended for storing the device.
6.2 Operation
Use the product at room temperature, protected from mechanical force such
as shock, dropping or impact.
7 Technical specifications
Technical specifications
Max. voltage
5.200 Vp
Approved HF devices
BOWA generators:
ARC250, ARC303, ARC400, ARC350
ARC Plus
Approved programs
Argon-Flex
Approved modes
Argon flexible
Argon flexible pulse
COMFORT recognition
The BOWA COMFORT instruments with
Plug’n Cut COMFORT instrument identification
are compatible with the following software
versions of your generator:
ARC 400 from V2.2.1
ARC 350 from V2.1.1
Using it with software version 1.x.x is not possible
as an update to a higher version is not supported.
8 Disposal
The disposal of medical equipment, packaging material and accessories must
be in accordance with relevant country-specific regulations and laws.

Related product manuals