Bowa SHE SHA - Filter Installation and Specifications

MN009-940-S0 EN BOWA SHE SHA smoke evacuation unit 13
Occlusion detected
1. Suction motor stops
2. The Green fan ON & Orange Standby LED's toggle back and forth
3. The suction has to be manually started by pressing the On / Standby button or remote
switch activator
Occlusion detection enabling /disabling

Press and hold the speed select button for over 5 seconds.
 The Orange Standby LED starts blinking if the occlusion detection is enabled
 The Orange Standby LED stops blinking if the occlusion detection is disabled
2.2 SHE SHA Filter Instructions
BOWA Filter REF 951-001
Configuration
Portable or tabletop
SHE SHA Filter - Multi Port Filter
4-Stage Filtration in One Casing,
(Pre-Filter, ULPA, Carbon, Post-Filter)
Filter(s)
ULPA
Particle Size, µm
0.1 to 0.2 Microns at 99.999% Efficiency
Filter Life
Automatic Factory Set Filter Sensor
Filter Life Indicator
Time Replacement
NOTE
Before installing or removing any filter, be sure that the system is turned
off.