12
M21/M26/M30
12
5 Installation 5
5.1.4 Machine Environment
Do not operate systems with open flames (such as gas-heated flatwork
ironer, tumbler) in the same area (machine room)
In the machine room or within 2 m (78.3 inches) of the machine, no hot
surfaces with temperatures above the ignition temperature of the solvent are
permitted.
Use a hose to vent the machine system outside or connect to the room ventilation system.
You must ensure that the air from the machine room cannot escape into a heating room, if
there is one in the area.
The air from the machine room is not permitted to be fed into the exhaust line of a furnace
system.
To Next Page
Loading...
