BÖWE M21 - Default Chapter; Table of Contents

BÖWE M21 /M26 /M30
Contents
1 General Information........................................................................1
1.1 Technical Literature ......................................................................................................................1
1.2 Laws, Ordinances, Regulations................................................................................................... 1
1.3 Corrective Maintenance Work......................................................................................................1
2 Safety Regulations..........................................................................2
2.1 Safe Installation and Commissioning .........................................................................................2
2.2 Authorized Use .............................................................................................................................. 2
2.3 Operation and Maintenance .........................................................................................................3
2.4 Repair Work ...................................................................................................................................4
2.5 Decommissioning and Disassembling........................................................................................5
2.6 Further Safety Regulations...........................................................................................................5
3 View of the Machine........................................................................8
4 Transport..........................................................................................10
4.1 Entry..............................................................................................................................................10
5 Installation.......................................................................................11
5.1 Operating Environment ..............................................................................................................11
5.1.1 Regulations ............................................................................................................................11
5.1.2 Temperature...........................................................................................................................11
5.1.3 Structural Surroundings..........................................................................................................11
5.1.4 Machine Environment.............................................................................................................12
5.2 Place of Installation.....................................................................................................................13
5.2.1 Space Requirements..............................................................................................................13
5.2.2 Machine Dimensions..............................................................................................................15
5.3 Floor Load....................................................................................................................................17
5.3.1 Dimensions............................................................................................................................. 17
5.4 Foundation...................................................................................................................................18
5.4.1 Foundation Dimensions.......................................................................................................... 18
5.4.2 Anchoring Surface.................................................................................................................. 21
5.4.3 Sound and Vibration Insulation ..............................................................................................21
6 Fixing the Machine in Place........................................................21
6.1 Machine Trough...........................................................................................................................22
6.2 Anchoring Methods..................................................................................................................... 22
6.3 Machine Installation....................................................................................................................25
7 Connection......................................................................................26
7.1 Dimensioned Drawing of the Machine Connections ...............................................................26
7.2 Lines and Pipelines.....................................................................................................................27
7.2.1 Steam.....................................................................................................................................27
7.2.2 Condensate............................................................................................................................27
7.2.3 Cooling Water Supply.............................................................................................................28