Bowflex Revolution - Adjusting Cable Tension; Cable Tension Adjustment Procedure

9
Step 6
6-1 Lift the box up and off of the styrofoam packing.
6-2 Separate the styrofoam packing. Remove plastic
wrapping from the engine.
Lift box
Styrofoam packing
Separate styrofoam
packing
Step 7
Tools:
• 5/16” Allen Wrench
7-1 Install one 1/2”x3/4” Allen Bolt.
7-2 Completely tighten hardware from
steps 4 and 7.
Hardware (1:1):
1 Allen Bolt (1/2” X 3/4 ”)
1 Washer (1/2”)
1/2”x 3/4” Allen Bolt
1/2” Washer
Unboxing Your Bowfl ex Revolution
™
Home Gym