30
Owner’s Manual
Repairs and Maintenance
Explanation of Calibration Display Messages (for information only):
is no text message in the TIME display window, the other displays will show the following:
Modulation (PWM) number (a number that provides digital information about base unit functions to the console) if
If Calibration Fails (Screen Displays “Cal Fail” Message):
This error usually indicates that the console is unable to determine the speed of the belts. Take the following steps:
1. Unplug the unit and remove the three back covers.
-
wards the card until it just makes contact.
3. Remove the card.
4. Plug unit in and recalibrate.
I f calibration is successful:
If calibration not successful:
back of this manual).
To Next Page
Loading...
