Bowflex TreadClimber TC10 - Leveling Your Machine

29
Machine Mat
The Bowfl ex
®
TreadClimber
®
Machine Mat is an optional accessory that helps keep your workout area clear and
adds a layer of protection to your fl oor. The rubber machine mat provides a non-slip, rubber surface which limits
static discharge and reduces the possibility of display or running errors. If possible, put your Bowfl ex
®
TreadClimb-
er
®
Machine Mat in your selected workout area before you begin assembly.
To order the optional machine mat, go to: www.bowfl ex.com, or call 1 (800) 605–3369.
Leveling Your Machine
Levelers are found on the front of the TreadClimber
®
machine. Make sure the TreadClimber
®
machine is level and
stable before you exercise. To adjust:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock the
leveler.
Do not adjust the levelers to such a height
that they detach or unscrew from the
machine. Injury to you or damage to the
machine can occur.
Operations
Loosen the upper locking nut.
Turn the leveler to adjust the height.
3.
Tighten the upper locking nut to lock the
leveler.
Do not adjust the levelers to such a height
that they detach or unscrew from the
machine. Injury to you or damage to the
machine can occur.
13 mm