23
YES
Console Issues (page 1 of 2)
BEGIN HERE:
If Console will not light up, follow
“Unit will not power on” Troubleshooting
Procedure.
If the units of measure are incorrect, follow the
Owner’s Manual instructions to correct the
setting before beginning these steps.
“+SAFETY KEY”
is displayed
Reinsert
Safety Key and
retest. Machine
working?
NO
NO
Contact Customer Care
(if inside US/Canada)
or your local distributor
(if outside US/Canada).
Follow Service Mode
Procedure 2 to check
firmware version and error
codes.
Replace Safety Key
Issue resolved
YES
Is
Safety Key
damaged?
To Next Page
Loading...
