Bowflex Treadmill 22 - Operations; Getting Started

47
Note: Your machine may not match the images provided exactly.
1. Unplug the power cord from the machine and wait 5 minutes. Place the
power cord in a secure location.
!
To reduce the risk of electrical shock or unsu-
pervised usage of the equipment, always unplug
the power cord from the wall outlet and wait 5
minutes before cleaning, maintaining or repair-
ing this machine. Place the power cord in a
secure location.
2. Remove the Right Base Shroud from the machine.
3. Disconnect the Middle and Lower Input/Output (I/O) Cables.
4. Using a #2 Phillips screwdriver, remove the 4 indicated screws (by ar-
rows) from Lower Junction Covers.
5. Gently release the snaps (indicated by ovals, two on each side) that
secure the Upper and Lower Junction Covers and remove the Upper
Junction Covers.
Right Base Shroud