Bowflex Treadmill 22 - Console Modes and Adjustments; Changing Incline Levels

48
6. Using a #2 Phillips screwdriver, remove the hardware (indicated by
arrows) that attaches the Right Inner Junction Cover. Remove the Right
Inner Junction Cover and place outside of the work area.
7. Using a #2 Phillips screwdriver, remove the hardware (indicated by an
arrow) that attaches the Right Outer Junction Cover. Remove the Right
Outer Junction Cover and place outside of the work area.
8. Using some cable or string, attach the upper connectors of the new
Middle I/O Cable to the lower connectors of the old Middle I/O Cable.
Right Inner
Junction
Cover
Right Outer
Junction
Cover