- 18 -
4.4.5 Battery quantity setting
Battery quantity setting
(Note: Inside the broken-line is the flashing part.)
When under the battery capacity setting press DOWN or when under bypass voltage
upper limit setting press UP, it goes to the battery quantity setting. The battery quantity line
flashes as in above picture.
Use button ENTER/ON to choose the different battery quantity. Battery quantity
range is 16、18, 20.
Press ESC/OFF button to exit the battery quantity setting (save the battery quantity
setting) and goes to battery capacity setting or bypass voltage upper limit setting.
4.4.6 Bypass Volt-Hi setting
Bypass voltage upper limit setting
(Note: Inside the broken-line is the flashing part.)
When under the battery quantity setting press DOWN or when under bypass voltage lower
setting press UP, it goes to the bypass upper limit setting. The bypass upper limit line
flashes as in above picture.
Use button ENTER/ON to set the different bypass voltage upper limit. The bypass
voltage upper limit range is 5%,10%,15%,25%(25% only for 220V output).
Press ESC/OFF button to exit the bypass voltage upper limit setting (save the
bypass voltage upper limit setting) and goes to battery quantity setting or bypass
voltage lower limit setting.
To Next Page
