- 20 -
4.4.9 Battery Test Setting
This page is the introduction to the Battery self-test setting. The default Settings is “OFF”
when the UPS has no need of the battery self-test function. When turn to “ON”, batteries
can do the self-test automatically per 30 days. Three kinds of Battery Self-test Time can be
chose as below.
When choosing On1, UPS can transfer to Battery Mode automatically per 30 days. And
the Battery Self-test Time is 10 seconds.
When choosing On2, UPS can transfer to Battery Mode automatically per 30 days. And
the Battery Self-test Time is 10 minutes.
---
When choosing On3, UPS can transfer to Battery Mode automatically per 30 days. And
the Battery Self-test Time is EOD.