Brady BBP12 - Setup Procedures for BBP12 Printer; Setting Up the Printer

BPP12 User Manual
10
CHAPTER 3 Setup
Setting up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the provided USB cable.
4. Plug the power cord into the AC power cord socket at the rear of the printer, and then
plug the power cord into a properly grounded power outlet.
Note:
Please switch OFF printer power switch prior to plug in the power cord to printer power
jack.
Power Supply
Plug
Power
Switch
USB interface
Serial/COM
Interface
USB host interface
Ethernet RJ-45
interface