Brady BBP12 User Manual

BPP12 User Manual
15
Loading the Media
Loading Media
1. Open the printer top cover by pulling the grey tabs, located on each side, toward the
front of the printer, then lift the top cover to the maximum open angle.
2. Separate and hold open the media holders.
3. Place the roll between the holders and close them onto the core.
4. Set the media holder lock switch to Lock (down) to hold the label roll firmly.

Brady BBP12 Specifications

General

Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	300 x 300 DPI
Maximum print height	- mm
Maximum printing width	105.4 mm
Display	LCD
Color display	Yes
Product color	Black, Blue
Tape type	D2
Flash memory	128 MB
Internal memory	64 MB
Wi-Fi	-
Optional connectivity	Serial (RS-232), USB 2.0
Connectivity technology	Wired
Maximum label width	111.76 mm
Quantity per pack	- pc(s)
Cables included	USB
Operating temperature (T-T)	5 - 40 °C
AC input voltage	110 - 240 V

Weight and Dimensions

Depth	258 mm
Width	202 mm
Height	173 mm
Weight	2500 g