12. Reference Technical Information
Specifications
MINIMARK
Printing method Thermal Transfer
Printing
resolution
203 dpi
(8dots/mm)
Printing speed
1 ~ 4 ips (51~ 102 mm/s)
4" is automatically reduced to 3" if cutter On
Printing length 1” ~ 45” (25mm ~ 1143mm)
Printing width Max 4.1” (104 mm)
Memory
2 MB DRAM
2 MB Flash ROM
CPU type 32 bit RISC microprocessor
Media sensor
Reflective
See - through
Display
LED
indicators x 2
Operation
interface
Button x 1
Communication
interface
Centronics
RS-232 serial
Bi-USB
(Full Speed)
Software MARKWARE, version 3.4 and higher
Media
Continuous tapes die-cut labels; Thermal paper or Vinyl /
Polyester
Max width 4.25” (108 mm)
Min width 1.0” (25.4 mm) Thickness .0025”~. 01” (.0635mm
~. 254mm)
Ribbon
Wax, Wax/Resin, Resin (Outside coating ribbon)
Ribbon width –4”
Ribbon length – max 100 M
Power source 110/220 VAC ± 10%, 50/60 Hz, external power adapter
Agency listing CE, UL, CUL, FCC class A, CCC
Operation
environment
40ºF ~ 100ºF (4ºC~38ºC) ; 10~90% non condensing
Cutter Rotary Cutter
To Previous Page
Loading...
