Communication Loss
If communication with a wireless device has been lost, the display screen will alternate between COMM LOSS
and the name of the device that has lost communication. See Table 1 for a list of possible device names.
The device will attempt to reconnect with the thermostat automatically, however you can also manually attempt
reconnection by pressing and holding the CONNECT button for 3 seconds on the device (see Installer Guide).
IDS1, IDS2, IDS3 or IDS4 Remote Indoor Sensor 1-4
ODS Remote Outdoor Sensor
HMS Remote Humidity Sensor
Control Module (see page 8)
CMOD
Table1
User Manual 26
To Next Page
Loading...
