Technical Data
DIGIMIC® wireless 33
Microphones
TM58/6 Conference Microphone
Description
The TM58/6 conference microphone is a professional electret microphone with ON status light ring indicator.
It has a matt black finish and is equipped with a rigid microphone neck with gooseneck and a high quality
connector (MINICON Neutrik). The TM58/6 is resistant to radio frequency interference from mobile phones,
PDAs and other wireless devices operated within a conference room.
Technical Data
Complies with international standard IEC914
Transducer Principle: Electret condenser
Directivity: cardioid
Frequency Response: 30 Hz ... 20,000 Hz see diagram
Sensitivity: -43 dB (0dB = 1V/Pa)
Output Impedance: 1 kOhm
Max. SPL
(Signal pressure level): 120 dB
Signal-to-noise Ratio: >68 dB (A-weighted, 1 kHz)
Operating Voltage: 5 VDC (1.5V ... 9V)
Indicator ring: color red
Nominal current: 20 mA (50 mA max.)
Connector: Neutrik Minicon
Dimensions: Total length 360 mm, diameter 17.5 mm
Weight: 80 g
This microphone is available in different length and colors. Please contact our sales division for more details.
To Next Page
Loading...
