To Next PageTo Next PageWhat to do if Braun 6029 Hair Removal System doesn’t work on small areas?
If your Braun Hair Removal System doesn't work on small areas, it's because both skin tone sensors need to be in contact with the skin. If the treatment area is too small or curved, the device cannot read a valid skin tone and won't activate. Try repositioning the device to make sure both sensors are touching the skin.
How to fix Braun Hair Removal System if power bars do not light up?
If the power bars on your Braun Hair Removal System do not light up when the treatment window is placed on the skin, ensure that the device is properly connected to an electrical outlet and is in Ready mode. Also, make sure that both skin tone sensors are making full contact with your skin. Adjust the device's position to ensure both sensors are in contact with the skin.
How to fix Braun Epilator power bars not lighting up?
If the power bars on your Braun Epilator do not light up when the treatment window is placed on the skin, ensure the device is connected to an electrical outlet and is in Ready mode. Also, make sure both skin tone sensors are in full contact with the skin. If necessary, reposition the device to ensure both skin tone sensors make skin contact.
What to do if Braun 6029 Hair Removal System is broken?
If your Braun Hair Removal System is broken, cracked, or appears defective, do not use it. If the device, the mains cord, or the power supply is damaged, usage is prohibited. If you have any doubts about its safety or suspect damage, refrain from using the device.
How to fix Braun 6029 Hair Removal System when power bars do not light up?
If the power bars on your Braun Hair Removal System do not light up when the treatment window is placed on the skin, ensure the device is properly connected to an electrical outlet and is in Ready mode. Also, make sure that both skin tone sensors are making full contact with your skin. If necessary, adjust the device's position to ensure both sensors are in contact with the skin.
Why is only the first LED red on my Braun Electric Shaver?
If the first LED illuminates red on the power bar of your Braun Electric Shaver, it means that the device has detected an invalid skin tone, indicating your skin is too dark. For safety reasons, the device cannot be activated in this condition.
Why is the first LED flashing red on my Braun Electric Shaver?
If the first LED on the power bars of your Braun Electric Shaver flashes red, it indicates that the removable front has been taken off. To resolve this, replace the removable front.
What to do if the first LED flashes white on my Braun Electric Shaver?
If the first LED on the power bars of your Braun Electric Shaver flashes white, it means the device is in STANDBY mode. To reactivate it, simply press any button.
Why my Braun Epilator doesn’t work on small areas?
Your Braun Epilator may not work on small or curved areas because both skin tone sensors must contact the skin for the device to activate. Reposition the device to ensure both sensors make contact with the skin to enable operation.
What to do if my Braun Epilator is broken?
If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
General| Wet & Dry | Yes |
|---|---|
| Type | Epilator |
| Operation | Cordless |
| Number of Tweezers | 40 |
| Massage Rollers | Yes |
| Pivoting Head | Yes |
| Speed Settings | 2 |
| Power Source | Battery |
| Charging Time | 1 hour |
| Included Attachments | Shaver head |
