Braun 6029 - User Manual

Other manuals for Braun 6029

User Manual37 pages

Manual15 pages

Questions and Answers:

W
wjenkinsSep 1, 2025
How to fix Braun 6029 Hair Removal System when power bars do not light up?
- J
  Jonathan MartinSep 1, 2025
  If the power bars on your Braun Hair Removal System do not light up when the treatment window is placed on the skin, ensure the device is properly connected to an electrical outlet and is in Ready mode. Also, make sure that both skin tone sensors are making full contact with your skin. If necessary, adjust the device's position to ensure both sensors are in contact with the skin.
W
William ShawAug 31, 2025
Why is only the first LED red on my Braun Electric Shaver?
- C
  Christopher DavisAug 31, 2025
  If the first LED illuminates red on the power bar of your Braun Electric Shaver, it means that the device has detected an invalid skin tone, indicating your skin is too dark. For safety reasons, the device cannot be activated in this condition.
B
Brian LopezAug 30, 2025
Why is the first LED flashing red on my Braun Electric Shaver?
- T
  Tracy BrownAug 30, 2025
  If the first LED on the power bars of your Braun Electric Shaver flashes red, it indicates that the removable front has been taken off. To resolve this, replace the removable front.
K
Keith DavisAug 29, 2025
What to do if the first LED flashes white on my Braun Electric Shaver?
- R
  richardsonjuliaAug 29, 2025
  If the first LED on the power bars of your Braun Electric Shaver flashes white, it means the device is in STANDBY mode. To reactivate it, simply press any button.
M
Michael GoodmanAug 28, 2025
Why my Braun Epilator doesn’t work on small areas?
- A
  Anthony OliverAug 28, 2025
  Your Braun Epilator may not work on small or curved areas because both skin tone sensors must contact the skin for the device to activate. Reposition the device to ensure both sensors make contact with the skin to enable operation.
T
Travis BradyAug 27, 2025
What to do if my Braun Epilator is broken?
- M
  Michael MartinAug 27, 2025
  If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
S
srileyAug 27, 2025
How to fix a Braun Epilator when the first LED flashes red?
- S
  Sarah SmithAug 27, 2025
  If the first LED on the power bars of your Braun Epilator is flashing red, it means the removable treatment window reflector has been taken off. Replace the reflector to resolve the issue.
P
Philip CastilloAug 25, 2025
What to do if Braun Epilator is broken?
- M
  Mark FordAug 26, 2025
  If your Braun Epilator is broken, cracked, or appears defective, do not use it, especially if the mains cord or power supply is damaged. If you have any doubts about its safety or suspect damage, refrain from using the device.
F
fbryanAug 25, 2025
What to do if my Braun Electric Shaver is broken or cracked?
- A
  Adriana DennisAug 25, 2025
  If the Braun Electric Shaver appears broken, cracked, or defective, immediately stop using it. This is especially important if the device, the mains cord, or the power supply is damaged. If you're unsure about its safety or suspect any damage, do not use it.

Braun 6029 Specifications

General

Wet & Dry	Yes
Type	Epilator
Operation	Cordless
Number of Tweezers	40
Massage Rollers	Yes
Pivoting Head	Yes
Speed Settings	2
Power Source	Battery
Charging Time	1 hour
Included Attachments	Shaver head