Braun 7 series Cleaning Instructions

4 Braun Series7 Electric Shaver Cleaning Instructions
2. Remove the foil cutting unit from the pivoting shaving head base.
3. Sweep the stubble and debris from the foil cutting unit (see Figure 5) and pivoting
shaving head base (see Figure 6) using the dry brush tool.
4. Blow any remaining stubble or debris away from the foil cutting unit and pivoting
shaving head.
Figure 5: Cleaning the Foil Cutting Unit Figure 6: Cleaning the Shaving Head Base
5. Push down on the foil cutting unit until it clicks into the pivoting shaving head base.
Note: The click indicates the foil cutting unit is locked into position.
The Clean and Renew Station
The Clean and Renew Station provides a thorough washing and lubrication of all shaving
head mechanisms. This is accomplished by flushing out stubble and debris from moving
parts using an alcohol based solution. In order to maintain efficient operation of the shaver,
this cleaning option should be performed regularly. The Clean and Renew Station also
automatically selects the appropriate cleaning level program and charges the shaver
battery. The details of the Clean and Renew Station are displayed in Figures 7 and 8 below.
Figure 7: Front Side Figure 8: Right Side
Reservoir
Opening
Start Cleaning
Button
Fluid Status
Lights
Clean and
Renew
Cartridge
Cleaning Level
Lights
AC Power
Cord Outlet

Braun 7 series Specifications

General

Sonic Technology	Yes
Wet & Dry	Yes
Charging Time	1 Hour
Running Time	50 minutes
Travel Lock	Yes
Precision Trimmer	Yes
Waterproof	Yes
Series	7
Shaver Type	Foil Shaver
Battery Type	Li-Ion
Quick Charge	5 minutes for one shave
Display	Yes
Cleaning Station	Clean & Charge Station (depending on the model)