Braun 7 series - Before Shaving; Installing the Clean&Renew Station; Charging and Cleaning the Shaver

7 Braun Series7 Electric Shaver Cleaning Instructions
To replace the Clean and Renew Cartridge:
1. Press the Clean and Renew Station housing release button located on the left side of
the unit (see Figure 14). The top housing will unlock and slide up (see Figure 15).
Figure 14: Housing Release Button Figure 15: Unlocked Station
2. Slide out the old cleaning fluid cartridge (see Figure 16).
Figure 16: Sliding Out Old Cartridge
3. Drain the contents of the spent cartridge and dispose of the empty plastic tank.
Housing
Release Button
Fluid Status
Lights
Clean and Renew
Station Housing
Clean and Renew
Cartridge