Page 39
Notes on Declared Standards referenced in the Declaration.
EN 13857:2008
EN ISO 13850:2008
EN ISO 14121-1:2007
EN 349:1993+A1:2008
EN 953:1997+A1:2009
EN 1037:1995+A1:2008
EN 982:1996+A1:2008
EN 614-1:2006+A1:2009
EN 60204-1:2006
EN 1756-2:2004+A1:2009
ECE R-107
Safety of machinery. Safety distances to prevent
hazard zones being reached by upper and lower
limbs.
Safety of machinery - Emergency stop - Principles
for design.
Safety of machinery - Risk assessment - Part 1:
Principles.
Safety of machinery. Minimum gaps to avoid
crushing of parts of the human body.
Safety of machinery. Guards. General
requirements for the design and construction of
xed and moveable parts.
Safety of machinery. Prevention of unexpected
start-up.
Safety of machinery. Safety requirements for uid
power systems and their components. Hydraulics.
Safety of machinery - Ergonomic design principles
- Part 1: Terminology and general principles.
Safety of machinery. Electrical equipment of
machines. General requirements.
Tail Lifts-Platform lifts for mounting on wheeled
vehicles-Safety Requirements-Part 2: Tail lifts for
passengers.
Regulation No. 107 of the Economic Commission
for Europe of the United Nations (UN/ECE) -
Uniform provisions concerning the approval of
category M2 or M3 vehicles with regard to their
general construction.
®
To Next Page
Loading...
Need help?
General
