5
2 Mounting and Connections
2.1 Warning
The ALPHA
ALPHAALPHA
ALPHAMFD is not certified by LBA/FAA/JAA as this is not required for Ultralights
in most countries. However, if such a certification will be required in the future, the
certification will be completed. The instrument is designed following the most state of
the art technologies and it is extensively tested following the procedures of LBA!
Although the ALPHA
ALPHAALPHA
ALPHAMFD is an electronic and very precise instrument, incorrect
values can be shown, mistakes in operation can be made and shown values can be
misinterpreted. By operating the ALPHA
ALPHAALPHA
ALPHAMFD, the user confirms that he knows about
these dangers and he is accepting responsibility for any possible risks.
In order to minimize these risks, the operating instructions MUST be read carefully. If
you have questions, please contact
BRÄUNIGER
or a
BRÄUNIGER
Service Centre.
2.2 Mounting into Cockpit
It is very easy to mount the ALPHAMFD in your cockpit. You only need a little skill,
no special tools are required.
Dimensions of ALPHAMFD:
Front 220 x 145 mm
Cockpit Cut-out 137 x 194 mm
Drillings 207 x 87 mm, 32 mm from
bottom and 26 from the top.
All measurements in mm
Total weight only approx. 850 grs!
Including Backup battery
220
145 87
To Next Page
Loading...