SERIES 54 PROXIMITY SENSORS
Installation, Operation, and Maintenance Manual
5 of 28© 2022 BRAY INTERNATIONAL, INC. ALL RIGHTS RESERVED. BRAY.COM The Information
contained herein shall not be copied, transferred, conveyed, or displayed in any manner that would
violate its proprietary nature without the express written permission of Bray International, Inc.
HAZARD-FREE USE
This device left the factory in proper condition to be safely
installed and operated in a hazard-free manner The notes and
warnings in this document must be observed by the user if this
safe condition is to be maintained and hazard-free operation of
the device assured
Take all necessary precautions to prevent damage due to rough
handling impact or improper storage Do not use abrasive
compounds to clean or scrape its surfaces with any objects
Configuration and calibration procedures are described in this
document Proper configuration and calibration is required for
the safe operation of this product
The control system in which the unit is installed must have
proper safeguards to prevent injury to personnel or damage to
equipment should failure of system components occur
This document does not cover every detail about every version
of the product described It cannot take into account every
potential occurrence in installation operation maintenance and
use
If situations transpire that are not documented in sucient detail
please request the required information from the Bray Distributor
or Representative responsible for your area
To Next Page
Loading...
Need help?
General