SERIES 54 PROXIMITY SENSORS
Installation, Operation, and Maintenance Manual
6 of 28© 2022 BRAY INTERNATIONAL, INC. ALL RIGHTS RESERVED. BRAY.COM The Information
contained herein shall not be copied, transferred, conveyed, or displayed in any manner that would
violate its proprietary nature without the express written permission of Bray International, Inc.
QUALIFIED PERSONNEL
A qualified person in terms of this document is one who is
familiar with the installation commissioning and operation of the
product and who has appropriate qualifications such as
> Is trained in the operation and maintenance of pneumatic
pressure equipment and systems in accordance with
established safety practices.
> Is trained or authorized to energize, de-energize, ground, tag
and lock electrical circuits and equipment in accordance with
established safety practices.
> Is trained in the proper use and care of personal protective
equipment (PPE) in accordance with established safety
practices.
> Is trained in first aid.
> In cases where the device is installed in a potentially
explosive (hazardous) location – is trained in the operation,
commissioning, and maintenance of equipment in hazardous
locations.
To Next Page
Loading...
Need help?
General