Breas Z1 - Z1 CPAP Device; Power Supply (AC to DC Power Adapter); PowerShell (Optional Accessory)

10
Doc. HD40-0007-02 En-Eu L-4
Z1 CPAP Device
The Z1 supplies continuous positive airway pressure and can be programmed to t the patient’s
prescriptive needs.
Power Supply (AC to DC Power Adapter)
The Power Supply provides power to the Z1. It takes AC power (voltage ranging from
100-240volts) from a wall outlet and converts it to DC voltage to power the Z1. The Power Supply
can be used with international power sources provided the appropriate plug adapter is used.
Tube Adapter
The Tube Adapter attaches the CPAP Tube to the Z1.
CPAP Tube
The Z1 System is provided with a CPAP Tube. The CPAP Tube connects the Z1 to your mask. Always
consult with your physician or health care provider regarding the selection of tubing for your
treatment. Follow the instructions provided with the tubing. To purchase replacement tubing visit
www.breas.com.
End Cap
The End Cap attaches to the air intake end of the Z1 and houses the Filter. For proper operation of
the Z1, the Filter should be replaced monthly or more often if necessary.
Filter
The Z1 uses a specially designed lter. The material has been specically chosen for the Z1 and
has been designed to be much larger than other CPAP lters. The unique shape of the lter ts
into the End Cap of the Z1, which was designed to allow for more eective lter surface area.
NOTE: To purchase replacement Filters visit www.breas.com.
USB Micro Cable
The USB Cable allows the Z1 to communicate with a computer to collect and view user data.
PowerShell (Optional Accessory)
The PowerShell houses both the Z1 and the Battery which allows temporary usage of the Z1
without the Power Supply. To purchase the PowerShell visit www.breas.com.