BREDABEDS MURPHY BED - Step 6: Attaching Headboard and Bottom Nailer; Step 7: Positioning the Bed Cabinet

15
Chapter 1: Hardware insertion and Bed Cabinet assembly.
Stand the Bed
Cabinet upright and
against the wall at
the desired location.
The Bed Cabinet
should be at against
the wall. Keep at
least a 1/2” clearance
on the sides to allow
for later adjustment.
If your baseboard
is larger than the
base notch provided,
please see the
Troubleshooting
section on Page 8.
FIG. 1G
STEP 7
Attach
“Headboard” and
“Bed Cabinet
Bottom Nailer”
as shown in Fig.
1F and tighten
cam ttings.
The Headboard
will normally sit
at a slight angle.
FIG. 1F
STEP 6