Brent 1082/882 — Operation
3-6
Hitching to Tractor (continued)
Transport Chain Connection
• ALWAYS USE TRANSPORT CHAIN WHEN TRANSPORTING IMPLEMENTS. FAILURE TO
USE A TRANSPORT CHAIN COULD CAUSE PERSONAL INJURY IF CART BECOMES
DISENGAGED.
Always use intermediate chain support when
connecting the grain cart directly to a tractor.
DO NOT use the intermediate chain support as
the chain attaching point. Fig. 2 shows how
the transport chain must be installed between
the tractor and grain cart.
The chain is rated for towing the grain
cart empty on public roads. Never tow
a loaded grain cart on public roads. Use
only ASABE approved chains. Allow no
more slack in the chain than necessary to
permit turning.
• REPLACE TRANSPORT CHAIN IF ANY LINK OR END FITTING IS BROKEN, STRETCHED
OR DAMAGED. DO NOT WELD TRANSPORT CHAIN.
Hydraulic Connections
• When coupling hydraulic hoses to ports on
the tractor, be sure that the coupler ends are
clean or dust, dirt and debris. Failure to do so
could contaminate hydraulic system resulting
in excessive wear and possible failure.
Fig. 2
Fig. 3
(February 2013)
To Next Page
Loading...
