Brent 1082/882 — Maintenance
4-26
Wheels and Tires (continued)
Tire Pressure
The following is to be used as a general guide for tire infl ation and fi gures can vary depend-
ing on specifi c brand of tire used. It is important that tires are inspected after
unit is loaded. Start with minimum pressure indicated. The tire should stand up with no
side-wall buckling or distress as tire rolls. Record the pressure needed to support the full
load and maintain this pressure to achieve proper tire life. Do not exceed maximum
recommended tire pressure. Each tire must be infl ated to 35 PSI max to seat the
beads, deflated to 5-10 PSI, then reinflated to the tire’s max PSI when mounting.
TIRE SIZE AND BRAND LOAD INDEX/PLY RATING MAXIMUM PSI
23.1x26 R-3 - Firestone 12 32
23.1x26 R-1 - Firestone 12 32
28Lx26 R-3 - Firestone 12 26
24.5x32 R-3 - Firestone 12 32
24.5x32 R-1 - Firestone 12 32
30.5x32 R-1 - Firestone 14 28
30.5x32 R-3 - Firestone 14 28
30.5x32 R-3 - Firestone 16 34
35.5x32 R-3 - Firestone 20 36
76x50.00x32 HF-3 - Firestone 16 40
76x50.00x32 HF-3 - Firestone 20 50
900/60x32 R-1 - Firestone 176A8 44
520/85x38 R-1 - Firestone 155A8 29
520/85x38 R-1 - Firestone 173A8 72
480/80x42 R-1 - Firestone 151A8 36
520/85x42 R-1 - Firestone 157A8 29
520/85x42 R-1 - Firestone 165A8 51
420/80x46 R-1 - Firestone 151A8 44
480/80x46 R-1 - Firestone 158A8 44
380/90x46 R-1 - Firestone 152B 51
1250/50R32 R-1 - Firestone 201D 46
800/65R32 R-1W - Firestone 172A8 44
800/60R32 R-3 - Firestone 181B 58
23.1x26 R-3 - Titan/Goodyear 10 26
23.1x26 R-1 - Titan/Goodyear 10 26
24.5x32 R-3 - Titan/Goodyear 12 32
24.5x32 R-1 - Titan/Goodyear 12 32
30.5x32 R-3 - Titan/Goodyear 16 26
30.5x32 R-3 - Titan/Goodyear 14 22
(November 2014)
To Next Page
Loading...
