4.0 Other functions
4.1. Printing.
4.2. Races.
4.3. Set Date and Time.
SPEEDY 17
The menu on the Speedy, gives two printout options -
(a) Clocking List.- A report giving the full list of all birds timed.
(b) Overview List. - A status report for each bird in the Speedy.
To print the clocking list or overview list, the Speedy should be
connected to the club system and any compatible printer.
The ‟Races‟ icon can be used to view the active races.
Navigate to the „Races‟ icon and press <OK> to view each of
the active races held within the Speedy.
The second line of each active race shows the club ID and
race point followed by the date and time when race marked.
For example: 1234EXET 2107 193019 indicates the race is
club ID 1234 from Exeter marked on 21st July at 19.30.19
Each of the active races is given a status number.
Status 1. The race has been basketed.
Status 3. The race has been read out but not closed.
Status 7. The race has been read out and closed.
Press <OK> to scroll through any other races on the Speedy.
Attention : Only active races showing status 7 can be deleted.
If an active race is showing as status 3 when it was intended
that it should have been showing as status 7, simply repeat
the read out procedure and carry out the instructions correctly
to close the race and turn it into a status 7 race.
If no races are held on the Speedy, then the icon will merely
blink for a split second before the menu is again displayed.
This icon enables you to set the date and time on the Speedy.
Use the <NEXT> and <PREVIOUS> buttons to change a
number and then the <OK> to confirm the selected number.
However when race basketing, the Speedy will automatically
synchronise with the time on the club master mother clock.
This function is de-activated if a race is active on the Speedy.