Bricon SPEEDY - 4.4. Racepoints Management; 5. Bricon Print Manager; 6. Unives 1.7 Compatibility; 7. Maintenance and Service

4.4. Racepoints.
5. Bricon Print Manager.
The Bricon Print Manager software package (including a USB cable) is an optional extra which enables
the information on the Speedy to be transferred and saved onto a home computer.
The full details of every clocking for each race or training flight on the Speedy will be saved, along with
the linkage data of each and every bird held on the Speedy. This information can then be viewed and
printed at any time. The package comprises of a Print Manager CD and a special USB cable.
6. Unives 1.7
The Speedy clock is fully compliant with the Unives 1.7 protocol.
Operating in Unives 1.7, the Speedy clock can be used with any other brand of master system that also
fully supports the Unives 1.7 protocol.
The Unives compatibility protocol declares that the Yamaichi connection socket is the universally
accepted connection between the ETS brands. To fully comply with the Unives protocol , Bricon will
make available from its dealers, a Bricon Yamaichi Unives connection cable consisting of a Bricon 9 pin
male connection plug at one end and a Yamaichi 4 pin male round connection plug at the other end.
This connection cable should be placed directly into the Speedy clock with the Yamaichi plug then
available for connecting to the unives socket of the variant brand of club master.
7. Maintenance and Service.
Always keep your Speedy clean and do not allow the clock to be immersed in water or other liquids.
Remove dirt from the Speedy with a lightly dampened cloth and do not use solvents.
Should the Speedy clock need any repair, this must be carried out by Bricon.
8. Technical data.
SPEEDY 18
Maximum number of pigeons : 200
Maximum number of races : 8
Fanciers : 3
Maximum number of antennas : 4
Number of fields : 4 x 6 fields
With buffers added - max number of antennas : 64
Maximum cable length : 150 metres
 The Speedy can hold up to 25 racepoints.
 The racepoints are numbered RA01 through to RA25.
 Names can be given to these numbers, by navigating to the
racepoints icon with the <PREVIOUS> and <NEXT> buttons.
 Each racepoint can be given a name of up to 4 characters.
 Racepoint names should be entered into the Speedy for when
race basketing on a non-Bricon brand of club system.
 NB: When basketing with a Bricon Club-Master, the racepoint
is selected from those entered onto the Master.