INTRODUCTION
Thank you for purchasing a Bale King bale processor. With the proper operation and service as
outlined in this manual, the Bale King will provide you with years of trouble-free operation.
This is a complete safety, operation and parts manual for the Bale King 5300. The manual
covers in detail how to safely and effectively use your new processor. The procedures outlined in
this manual should be followed to ensure safe operation and longevity of your machine. The parts
manual covers all parts you may need to order in case of accident or breakdown. Please read
completely through this manual before beginning operation of your new machine.
Safety Precautions
The following safety precautions MUST be followed to ensure safe operation of the Bale King
bale processor.
• ALWAYS turn OFF the tractor when leaving the operating platform.
• DO NOT stand in front of the discharge chute while the machine is running.
• DO NOT walk or move under the bale forks when they are in the upward position, unless
the cylinder safety lock is in place.
• DO NOT enter the machine while in operation.
• DO NOT clean machine while in operation.
• DO NOT stick any device into the machine to clear debris while the machine is in
operation.
• ALWAYS turn off the machine when cleaning the machine, removing twine, or
hooking/unhooking the machine
• ALWAYS use safety chain when towing the machine on a highway.
• DO NOT operate if any part of the PTO safety shielding is missing or is not secured.
To Next Page
Loading...