Deflector
The Bale King 5300 is equipped with a hydraulic side deflector to change the discharge distance
and distribution. It also comes with a flipping rubber flap for superior control of the spread pattern.
Moving the deflector to the down position and flipping the rubber down (above left) will
allow the hay to be laid in a windrow, or bunk feeder. Swinging the deflector up will allow you
to spread straw out over a large area. If you also flip the rubber up (above right), you will be able
to "fine tune" the discharge, to control the height and distance.
To flip the rubber, simply pull on the handle and swing into position. Then push the handle
so that the tabs catch in the notches and lock into place.
The Bale King 5300 deflector will bunk feed to a distance of 35” from the tire when in the
lowest position. When the deflector is not folded, the transport width of the machine is 9’-10”.
To Next Page
Loading...