Tires
Wheel bearings should be inspected annually for adjustment and lubricated annually. Inspect more
often for extensive traveling.
• To tighten the wheel bearings, lift up each wheel (one at a time) until the wheel spins freely.
• Remove dust cap and the cotter pin which retains the castle nut.
• Tighten the nut until the wheel will rotate approximately two turns when given a firm spin.
• Align castle nut to closest hole and insert the cotter pin.
• Pack hub full of grease and reinstall the dust cap.
Proper tire inflation will help to alleviate puncture problems when towing and operating on rough
terrain.
Note: When inflating tires, use a clip-on chuck and extension hose long enough to allow you to
stand to one side and NOT in front of or over the tire assembly.
Note: Warranty does not cover damaged rims and hubs due to loose wheel bolts or flat tires.
Tire warranty is covered by the tire manufacturer.
To Next Page
Loading...