33
which host system functions occur and verify that these are in line with the system
configuration for this vehicle.
6) Close detection behaviour: Verify objects in between 0.3m and 1.3m distance are only
detected if they move relative to that sensor.
7) Very close detection awareness: Verify objects less than 0.3m from the sensor are not
detected.
8) Similar to the previous tests the operator should scan all the edges of the detection area
according to the installed system or configuration for this vehicle. He should note down the
detected locations and check if they match with the detection area set when this Brigade
Backsense
®
System was installed on this vehicle.
To Next Page
Loading...
