EasyManuals Logo

Briggs & Stratton PW101-2010 User Manual

Briggs & Stratton PW101-2010
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Thank you for purchasing this quality-built Briggs & Stratton® pressure washer. We are pleased that you’ve
placed your condence in the Briggs & Stratton brand. When operated and maintained according to the
instructions in this manual, your Briggs & Stratton pressure washer will provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with pressure
washers and how to avoid them. Because Briggs & Stratton does not necessarily know all the applications this
pressure washer could be used for, it is important that you read and understand these instructions thoroughly
before attempting to start or operate this equipment. Save these original instructions for future reference.
This pressure washer requires nal assembly before use. Refer to the Assembly section of this manual for
instructions on nal assembly procedures. Follow the instructions completely.
Where to Find Us
You never have to look far to nd Briggs & Stratton support and service for your pressure washer. Consult your
Yellow Pages. There are over 30,000 Briggs & Stratton authorized service dealers worldwide who provide quality
service.
Pressur We asher Engine
Model Number Model Number
Revision Type
Serial Number Code Number
Copyright © 2018. Briggs & Stratton Corporation
Milwaukee, WI, USA. All rights reserved.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Briggs & Stratton PW101-2010 and is the answer not in the manual?

Briggs & Stratton PW101-2010 Specifications

Pressure and Flow IconPressure and Flow
outlet pressure4, 000 PSI (275.8 BAR)
flow rate4.0 GPM (15.14 LPM)
water supply temperature41°F (5°C) - 100°F (38°C)
Engine Specifications IconEngine Specifications
displacement25.63 cu. in. (420 cc)
spark plug gap0.030 in. (0.76 mm)
fuel capacity6.97 Qt. (6.6 Liters)
Oil Specifications IconOil Specifications
oil capacity36 Ounces (1.0 Liter)

Related product manuals